What size submersible pump do I need for my fountain?
Choose a pump that is at least one and one-half times the head height for optimal performance. For example, if your fountain is 30 inches tall, find a pump with a maximum lift of 45 inches or more.
What kind of pump do I need for a fountain?
Fountain pumps are typically centrifugal pumps, which move water using pressure from centrifugal force created by the movement of an impeller. A fountain pump functions like a sump pump, except that the water is fed back into the pond or reservoir rather than out of it.
How do I know what size waterfall pump I need?
To determine the GPH/GPM needed for your waterfall or stream – multiply the width in feet x 30 GPM. Example: To build an “average” waterfall 3′ wide and 10′ high above the pond – multiply 3′ (width) x 30 GPM which equals 90 GPM or 5,400 GPH at 10 feet of head.
Can you use a sump pump for a fountain?
Sump pumps can be used to make a pond fountain but you will have better results with a pump designed to work as a fountain.
Can I use a sump pump for a fountain?
Yes, sump pumps can be used to drain ponds with fountains. Make sure that the fountain is turned off and the drainage pump is setup far away from the fountain.
What is the difference between a pond pump and a waterfall pump?
Direct Drive Pond Pumps are stronger pumps usually referred to as a Waterfall Pump and best used for taller waterfalls and higher head lift situations. Direct Drive pumps usually take a little more energy since they are more powerful and since they have more parts that can wear down usually have a shorter warranty.
What size pump do I need for my pond and waterfall?
Water Circulation Factors For example, if you have a 1000 gallon pond, then you need a pond pump rated at a minimum of 500 GPH. If your pond has a skimmer or waterfall, the water should be turned approximately once every hour. Therefore, if you have an 1800 gallon pond, you will need an 1800 GPH rated pump.
