How much is a SCAG 48 walk behind?
Harper Scott How much is a SCAG 48 walk behind?
Reliable Power, Up To 15 HP
| Model | Description | MSRP |
|---|---|---|
| SW48V-14FS | 48″ Velocity Plus™ Cutter Deck, 14 HP Kawasaki® 481FS | $5,183 |
| SW52V-15FS | 52″ Velocity Plus™ Cutter Deck, 15 HP Kawasaki® 541FS | $5,777 |
| * Limited availability. Contact your local Scag dealer for specific availability information. |
How much does a SCAG walk behind mower cost?
While the price you pay will depend on the dealership, the MSRPs for Scag mowers range between around $4,800 to nearly $21,000.
How much is a SCAG 36 walk behind?
Reliable Power, Up To 22 HP
| Model | Description | MSRP |
|---|---|---|
| SWZT36H-14FS | 36″ Hero Cutter Deck, 14.5 HP Kawasaki® FS481V – recoil-start engine | $5,848 |
| SWZT48H-15FSE | 48″ Hero Cutter Deck, 15 HP Kawasaki® FS600V – electric-start engine | $6,480 |
| SWZT52H-18FSE | 52″ Hero Cutter Deck, 18.5 HP Kawasaki® FS600V – electric-start engine | $6,827 |
Do SCAG mowers hold their value?
Due to the quality construction and the heavy-duty components we use in our products, Scag mowers retain a higher-than-normal resale value. Used equipment values are greatly dependent upon the region you are in and the condition of the specific mower.
What does SCAG stand for?
SCAG
| Acronym | Definition |
|---|---|
| SCAG | Southern California Association of Government |
| SCAG | Selective Coronary Angiography (cardiology) |
| SCAG | Southampton City Art Gallery (UK) |
| SCAG | Scientific and Clinical Advances Group (London, UK) |
How many hours do SCAG mowers last?
2,000+ hours is a reasonable estimate, with replacement of common wear parts of course – tires, belts, pulleys, bushings/bearings etc.
How much does a SCAG V Ride 2 cost?
New SCAG V-Ride II 52, 37HP Vanguard, 52″ Cut Fab Deck, Stand-On, MSRP $11,000.
How heavy is a SCAG?
MSRP
| Product Dimensions | 52″ Turf Tiger Gas / Propane | 72″ Turf Tiger Gas / Diesel |
|---|---|---|
| Width (chute in transport position) | 53.75″ | 73.75″ |
| Height (ROPS down) | 46.5″ / 52.5″ | 46.5″ |
| Height (ROPS up) | 68″ | 68″ |
| Weight | 1,418 lb / 1,486 lb | 1,556 lb / 1,739 lb |
Is SCAG better than exmark?
SCAG is close but i think the big ferris’s are better. The exmark will cut nicer but not as comfortable. Of course they all put cup holders on their ztr’s.
How much does a Scag Tiger Cat 2 cost?
Big Power, Up To 32 HP
| Model | Description | MSRP |
|---|---|---|
| STCII-61V-26FT-EFI | 61″ Velocity Plus™ Cutter Deck, 26 HP Kawasaki®730FT – electronic fuel injection | $11,880 |
| STCII-61V-32BV | 61″ Velocity Plus™ Cutter Deck, 32 HP Briggs Vanguard™ BIG BLOCK™ | $12,584 |
